Oce im5530 Printing Manual - page 264
5 Printing from Windows
262 Setting Up Print Options
y
The default value will be “Always Use TrueType Fonts” for the PCL6 printer driver.
y
The default value will be “Use Font Substitution Table” for the PS3 printer driver.
2) Substitution Table Edit
This table shows how each TrueType font is substituted. You can edit the substitution setting
for each TrueType font. In this table, the TrueType font names are displayed in the TrueType
Font column, and how the TrueType font is printed is shown in the Use Printer Font column.
To edit the substitution table, select the TrueType font that you want to edit from the table,
and select how the TrueType font is printed at the Printer Font For drop down box.
At the Printer Font For drop down box, you can select “Download as Soft Font” to send the
TrueType fonts in Type 42 format, or other available printer fonts to be substituted. The
printer fonts displayed in the drop down box differ depending on the TrueType fonts.
3) [Run Font Manager]
Click this to run the Font Manager. This is not available if the Font Manager is not installed.
The [Run Font Manager] button is not displayed for the PCL6 printer driver.
Configuration Tab
The Configuration Tab allows you to configure options. When any optional unit is installed in this
equipment, set the configuration of the machine on this tab.
1) Drawer
This sets whether or not the optional drawers or LCF is installed.
- Drawer3 & Drawer4 — Select this when 3rd drawer and 4th drawer are installed.
- LCF — Select this when the LCF is installed.
LCF is not available for some countries or regions.
2) External LCF
Check this when the External LCF is installed.
1
15
16
17
3
4
5
6
7
8
9
10
11
12
14
13
2