Oce im5530 Printing Manual - Setting Up Print Options

Setting Up Print Options    227

Setting Up Print Options

Print Options are the attributes you set to define the way a print job is processed.  For example, 

the private print and proof print options determine how the copier manages your print job.

To find the printing instructions for your specific needs, refer to the procedures in the following 

section.

 P.265 “Printing with Extended Print Functionality”

How to Setup

There are several ways to set print options.  Also, how the settings effect printing varies depend-

ing on the way you set the options. Also the tabs displayed vary depending on how you display 

the printer properties.

Setting Initial Values of Print Options

Setting the print options by displaying the printer properties from the Printers folder within the 

Windows Start menu will establish the initial values of the options. For example, the paper size 

setting you most commonly use, optional device settings, user information settings, etc., are set-

tings you will not want to change every time you print. It is convenient to set these options as ini-

tial values.

If you have installed the printer driver by Point-and-Print on Windows 2000, Windows XP, or 

Windows Server 2003, please set the initial values of print options from the [Printing Default] 

button in the [Advanced] tab on the properties dialog box that can be displayed by selecting 

[Properties] in the [File] menu.  The initial values can be set using the following procedures.

How to display: Windows 2000/XP/Server 2003

1

Click [Start], [Settings], and select [Printers and Faxes].

2

Select the printer driver for the equipment, click the [File] menu and 

select [Printing Preferences].

How to display: Windows NT 4.0

1

Click [Start], [Settings], and select [Printers].

2

Select the printer driver for the equipment, click the [File] menu and 

select [Document Defaults].

How to display: Windows 98/Me

1

Click [Start], [Settings], and select [Printers].

2

Select the printer driver for the equipment, click the [File] menu and 

select [Properties].