Oce im5530 Printing Manual - page 341
Printing from an Application 339
Example: The command to specify output bin 1 is “lp -o bin1 filename”.
Hole Punching
When the hole punch option is installed it can be activated using the following option.
If this option is not specified, the default value of “nopunch” will be used.
This function is not available for all paper sizes and the users should refer to the copier manual
for a list of compatible paper sizes. In particular, A5, A6 and statement paper sizes will not work
with this function.
Example: The command to hole punch the long edge feed portrait page is
“lp -o punch=1 filename”.
Media Type
The paper source can also be selected using the media type using the following option.
In PostScript Deferred Media Selection is always turned on so the paper size has priority over
the media type and the paper source.
In PCL5e the paper size always has priority over the media type and the paper source.
If this option is not specified, the default value will be used.
Example: The command to specify Thick1 media type is “lp -o mtype=Thick1 filename”.
Option Value
Alternate
Value
Description
punch=0
nopunch
Hole punching is turned off.
punch=1
Hole punch long edge without rotation.
punch=2
Hole punch short edge without rotation.
punch=3
Hole punch long edge with 180 degree rotation.
punch=4
Hole punch short edge with 180 degree rotation.
Option Value
Alternate
Value
Description
mtype=Plain
The paper source that contains Plain paper is
requested.
mtype=
Transparency
The paper source that contains transparency slides is
requested.
mtype=Thick1
The paper source that contains Thick1 paper is
requested.
mtype=Thick2
The paper source that contains Thich2 paper is
requested.
mtype=Thick3
The paper source that contains Thich3 paper is
requested.