Oce im5530 Printing Manual - page 237
Setting Up Print Options 235
y
The tab paper cannot be fed from LCF (not available for some countries or regions)
External LCF, and Inserter Unit.
y
When you place the tab paper on the drawer, make sure the tab side of the paper
becomes left side.
y
When you place the tab paper on the Bypass Tray, make sure the tab side of the paper
becomes outside.
y
If the document for tab printing is not created properly or the Image Shift Width is not set
properly, the image will not be printed in the correct position within the tab extension.
Please make sure to create the document and set the Image Shift Width correctly.
y
If mis-printing occurs while multiple tab pages are printed continuously, dirt may adhere
to the reverse side of a paper. To avoid this, it is recommended to print a tab paper as a
separated job for each page so that this equipment performs cleaning before printing
next tab paper.
4) Paper Source
This selects the paper source. Please select a paper source that correlates with the printing
size.
- Automatic — Automatically selects the paper set in this equipment according to the
printed document size.
- Drawer 1 — Paper is fed from the 1st Drawer.
- Drawer 2 — Paper is fed from the 2nd Drawer.
- Drawer 3 — Paper is fed from the 3rd Drawer. This cannot be selected if the Drawer 3
and 4 are not installed.
- Drawer 4 — Paper is fed from the 4th Drawer. This cannot be selected if the Drawer 3
and 4 are not installed.
- LCF — Paper is fed from the LCF. This cannot be selected if the LCF is not installed.
- External LCF — Paper is fed from the External LCF. This cannot be selected if the
External LCF is not installed.
- Bypass Tray — Paper is fed from the Bypass Tray.
y
LCF is not available for some countries or regions.
y
The selectable values vary depending on the optional devices installed on this equipment
and their configuration on the Configuration tab.
Place the tab paper
so that the tab side
becomes left side.
Place the tab paper
so that the tab side
becomes outside.