Oce im5530 Printing Manual - page 265

Setting Up Print Options    263

3) Inserter Unit

Check this when the Inserter Unit is installed.

4) Finisher

This sets whether or not the optional finisher is installed.

- None — Select this when finisher is not installed.

- Finisher — Select this when the Finisher is installed.

- Saddle Stitch Finisher — Select this when the Saddle Stitch Finisher is installed.

5) Hole Punch Unit

This sets whether or not the optional hole punch unit is installed.

- None — Select this when hole punch unit is not installed.

- 2 Holes — Select this when the 2 hole punch unit is installed.

- 2/3 Holes — Select this when the 2/3 hole punch unit is installed.

- 4 Holes (F) — Select this when the 4 hole (F) punch unit is installed.

- 4 Holes (S) — Select this when the 4 hole (S) punch unit is installed.

6) Drawer 1/Paper Type

This sets the paper size and paper type set in the 1st drawer.

7) Drawer 2/Paper Type

This sets the paper size and paper type set in the 2nd drawer.

8) Drawer 3/Paper Type

This sets the paper size and paper type set in the 3rd drawer.  This can be set only when the 

3rd drawer is installed.

9) Drawer 4/Paper Type

This sets the paper size and paper type set in the 4th drawer.  This can be set only when the 

4th drawer is installed.

10) LCF/Paper Type

This sets the paper size and paper type set in the LCF.  This can be set only when the LCF is 

installed.

LCF is not available for some countries or regions.

11) External LCF/Paper Type

This sets the paper size and paper type set in the External LCF.  This can be set only when 

the External LCF is installed.

12) Bypass Tray/Paper Type

This sets the paper type set in the Bypass Tray.

13) Memory

Select the size of memory installed.

14) Override Application Paper Settings

Check this to use the paper source setting in the printer driver rather than the application set-

ting.

15) Enable SNMP Communication

Check this to enable obtaining the configuration information from this equipment.

If you disable the SNMP Communication, the notification of the Document Monitor also will 

be disabled.