Oce im5530 Printing Manual - page 24
2 Installing Client Software for Windows
22 About the Installation
y
To print with a Raw TCP connection, this equipment must be configured to enable Raw TCP
Print Service. Ask your administrator if the Raw TCP Print Service is enabled.
y
To print with a LPR connection, this equipment must be configured to enable LPD Print Ser-
vice. Ask your administrator if the LPD Print Service is enabled.
SMB Printing
Available for:
Windows 98, Windows Me, Windows NT 4.0, Windows 2000,
Windows XP, Windows Server 2003
This equipment can be used with an SMB printer connection that allows you to connect to this
equipment using File and Printer Sharing for Microsoft Networks service. SMB printing is the
common method used to set up the printer. However, SMB printing is not suitable for printing a
large amount of documents.
P.85 “Installing Client Software for SMB Printing”
It assumes using SMB printing in a small network. If you can use the Windows NT 4.0, Windows
2000, Windows XP, or Windows Server 2003 as a print server, it is recommended to set up for
printing via Windows print server. For further information about setting up printing via a Win-
dows print server, see the Network Administration Guide.
— Internet Connection
Available for:
Windows 2000, Windows XP, Windows Server 2003
Windows 98
Windows Me
Windows NT 4.0
Windows 2000
Windows XP
Windows Server 2003
Windows 98
Windows Me
Windows NT 4.0
Windows 2000
Windows XP
Windows Server 2003
Windows 98
Windows Me
Windows NT 4.0
Windows 2000
Windows XP
Windows Server 2003
Network Environment over TCP/IP
Setting up SMB Printer
Connection
Windows 2000
Windows XP
Windows Server 2003
Connecting over Internet
Setting up the IPP
printer connection