Oce im5530 Printing Manual - page 257
Setting Up Print Options 255
The selectable values in the Source drop down box vary depending on the optional devices
installed on this equipment and their configuration on the Configuration tab.
Print Style
This selects how you want to print a back cover.
- Do not print on page — Select this to insert a blank cover.
- Print on 1 side of page — Select this to print the last page image on the front side of a
cover.
- Print on both sides of page — Select this to print the last two page images on both
sides of a cover. This is available only when the 2-Sided Printing option is enabled on the
Setup tab.
If “Print on 1 side of page” is selected while 2-Sided Printing is performed, the last page is
printed on the front side of the cover sheet and back side of the cover will be blank.
5) Interleave Pages
This sets the interleaving page feature when you want to insert paper of a different type (or
from another source) between every page of your print job. For example, you could use this
option to insert blank, colored sheets between overhead transparencies.
To enable interleaving pages, check on the box and select the location from where sheets
are to be fed.
Source
Select the location from where a interleaving sheet is to be fed. When “Automatic” is
selected, the paper is automatically selected according to the printed document size.
The selectable values in the Source drop down box vary depending on the optional devices
installed on this equipment and their configuration on the Configuration tab.
Duplicate
When you check on this, you can print previous page images on the inserted sheet.
Effect Tab
The Effect Tab contains print options that add effects to your print jobs such as Watermarks,
Overlay Image printing, Rotate printing, Mirror printing, and Negative printing. Also it lets you
enable Toner Save and Do not Print Blank Pages functions.