Oce im5530 Printing Manual - page 342

7 Printing from UNIX

340    Printing from an Application

Paper Source

The paper source can be selected using the following options.

In PostScript Deferred Media Selection is always turned on so the paper size has priority over 

the paper source. In PCL5e the paper size always has priority over the paper source.

If this option is not specified the command will not be sent so the printer’s default value will be 

used.

Example: The command to specify the LCF paper source is “lp - o lcf filename”.

Duplexing

The current duplex mode can be specified using the following options.

If this option is not specified, the default value “simplex” will be used.

It is not necessary to specify duplexing for Booklet Mode (sduplex). Setting duplexing separately 

can override the booklet mode setting for duplexing.

Example: The command to specify long edge duplexing is “lp -o duplex filename”.

Option Value

Alternate 

Value

Description

auto-source

Select auto paper tray selection.

manual

Select Bypass Tray.

drawer1

upper

cas1

Select the 1st drawer.

drawer2

lower

cas2

Select the 2nd drawer.

drawer3

pedupper

cas3

Select the 3rd drawer.

drawer4

pedlower

cas4

Select the 4th drawer.

LCF

lcf

Select the LCF.  LCF is not available for some countries 

or regions.

lcf

tandem

Select the LCF.  LCF is not available for some countries 

or regions.

external

Select the external LCF.

Option Value

Alternate 

Value

Description

simplex

Turn duplexing off.

duplex

lduplex

duplex_long

duplex=long

hduplex

Turn duplexing on with long edge binding.

sduplex

duplex_short

duplex=short

vduplex

Turn duplexing on with short edge binding.