Vacon 100 INDUSTRIAL Applications Manual - page 59
Other manuals for 100 INDUSTRIAL:
Installation Instruction, Installation Manual, Installation Manual, Installation Manual, User Manual, User Manual, Installation Manual, Installation Manual, Applications Manual, Installation Manual, Installation And User Manual, Applications Manual, Safety Manual, Marine Installation Manual, Installation Manual, Installation Manual
of
78
3
vacon • 57
VACON HVAC Drive Application
Tel. +358 (0) 201 2121 • Fax +358 (0)201 212 205
3.5.1.18
P
RESET
FREQUENCY
SELECTION
B0
3.5.1.19
P
RESET
FREQUENCY
SELECTION
B1
3.5.1.20
P
RESET
FREQUENCY
SELECTION
B2
Connect a digital input to these functions with the TTF programming method (see chapter
3.5.2) to be able to apply Preset frequencies 1 to 7 (see Table 47 and pages 31, 33 and 56).
3.5.2.2
AI1
SIGNAL
FILTER
TIME
When this parameter is given a value greater than 0 the function that filters out disturbances
from the incoming analogue signal is activated.
NOTE: Long filtering time makes the regulation response slower!
Figure 9. AI1 signal filtering
%
100%
63%
P3.5.2.2
t [s]
1100K11
Filtered signal
Unfiltered signal