Vacon 100 INDUSTRIAL Applications Manual - page 70
Other manuals for 100 INDUSTRIAL:
Installation Instruction, Installation Manual, Installation Manual, Installation Manual, User Manual, User Manual, Installation Manual, Installation Manual, Applications Manual, Installation Manual, Installation And User Manual, Applications Manual, Safety Manual, Marine Installation Manual, Installation Manual, Installation Manual
of
78
VACON HVAC Drive Application
vacon • 68
24-hour support +358 (0)40 837 1150 • Email: vacon@vacon.com
3
Figure 19.
Selection 1, Enabled:
If the regulating motor needs to be included in the autochange or interlock logic make the con-
nection according to Figure 20 below.
Every motor is controlled with one relay but the contactor logic takes care that the first con-
nected motor is always connected to the drive and next to the mains.
M
Motor 1
M
Motor 2
M
Motor 3
K2
K3
Motor 1 control from relay
Motor 2 control from relay Motor 3 control from relay
NOT USED
K2
K3
Mains
100K25.fh11