Xerox 4213 User Manual - page 103
USING THE 4213 MENUS
Start Data Monitor Mode
Data Monitor is a data analysis tool which diagnoses application
software related problems.
If the data monitor mode is enabled at this menu and you submit
a print job (XES emulation only), the printer automatically prints
the data received prior to any formatting or manipulations
conducted by the printer. The printout contains the hex and
ASCII or EBCDIC representations of each character or function
received by the printer. If the Last Page indicator light remains
on after printing stops, press the Online
H
button to take the
printer off line and then press the Last Page
C
button to print the
remaining page of data.
The printout always uses a landscape page with the 16.66 pitch
XCP14iso-L font with the ASCII or EBCDIC symbol set. Any
control characters from Hex 00 to Hex 20 will print the
abbreviated ASCII or EBCDIC meaning. If a character in the
printable Hex 20 to FF is undefined, the “Happy Face” character
(Hex 01) from the IBM US symbol set is printed in the ASCII area
of the data monitor printout. Refer to appendix B for a sample
data monitor printout.
D
To begin data monitor mode, press the Select button when the
message display reads:
TEST MENU
START DM MODE
Stop Data Monitor Mode
D
To disable data monitor mode, press the Select button when the
message display reads:
TEST MENU
STOP DM MODE
XEROX 4213 LASER PRINTER USER GUIDE
3-51