Xerox 4213 User Manual - page 125
PRINTING WITH THE 4213
In XES the default font has the following characteristics:
•
Landscape
•
XCP
•
ISO (International Standards Organisation encoding scheme)
•
14-pitch
•
Upright
•
Medium weight.
In LJ2D the preset default font has the following characteristics:
•
Portrait
•
Roman-8 (symbol set)
•
10-pitch
•
Upright
•
Medium weight.
Note: The font characteristics are explained later in this chapter.
Some font cartridges contain a default font. When the font
cartridge is installed, its default font is used unless it is changed
at the Main Menu or by printer commands.
Note: If no tabs have been set for a job using a portrait font,
the 4213 automatically uses the default portrait tabs. If no tabs
have been set for a job using a landscape font, the 4213
automatically uses the default landscape tabs.
The default font is automatically assigned using the following
priority:
•
Use default font on the left font cartridge if one is defined.
•
Use default font on the right font cartridge if one is defined.
•
Use default font from the resident fonts.
If a downloaded font is selected as the default then the default
font returns to the first internal font when the printer is powered
on again. If a cartridge font is selected as the default font then it
is still the default when the printer is powered on again if the
same cartridge is present. If the cartridge has been removed
then the default returns to the first internal font.
Note:
Th
is information applies when your default font is a
cartridge font:
— Removing cartridges while the printer is turned on may
cause the printer to lock up and may cause the printer to
return to the factory default font (if the default font was
contained in the cartridge).
4-16
XEROX 4213 LASER PRINTER USER GUIDE