Xerox 4213 User Manual - page 383
POSTSCRIPT EMULATION
B. Placing the printer in 1-sided print mode with book binding
This example shows you how to change the printing mode to 1-
sided, (book binding for POSTSCRIPT)
.
H
To select 1-sided printing:
Press the Online button to take the printer off line.
Press the Menu button to access the Main Menu.
Press the Last Page button until the display reads EMULATION.
Press the Test button to display the available emulation headings. The display reads XES*.
Press the Last Page button until the display reads POSTSCRIPT.
Press the Select button to select POSTSCRIPT.
Press the Test button to display the POSTSCRIPT emulation configuration headings. The
display reads DUPLEX.
Press the Test button to display the duplex options. The display reads ON*.
Press the Last Page button until the display reads OFF.
Press the Select button to select OFF.
To select book binding:
Press the Menu button to return to the higher level menu heading.
Press the Last Page button until the display reads TUMBLE.
Press the Test button to display the tumble options. The display reads ON*.
Press the Last Page button until the display reads OFF.
Press the Select button to select OFF.
Press the Online button to put the printer back online. 1-sided copies are received until a
command to change emulations is received, the emulation is changed using this menu, or the
printer is switched off.
C
B
C
D
B
A
C
B
C
B
C
D
D
H
A
A4-26
XEROX 4213 LASER PRINTER USER GUIDE