Xerox 4213 User Manual - page 140
of
441
PRINTING WITH THE 4213
2.
Align a single envelope, towards the arrow and against the
feed guide at the left edge of the bypass tray.
Envelopes are fed address side up.
•
If the envelope flap is on the long edge of the envelope,
place the closed fold against the left feed guide.
•
If the envelope flap is on the short edge of the envelope,
place the closed fold against the feed rolls, to be fed in first.
Refer to figure 4-5 for a diagram showing envelope alignment.
Figure 4-5.
Envelope orientation diagram
Envelope flap on long edge, against the bypass feed guide
Note: Flaps should be
closed and on the bottom.
Printing is placed on this
side.
Envelope flap on short edge, toward the feed rolls
XEROX 4213 LASER PRINTER USER GUIDE
4-31