Xerox 4213 User Manual - page 193
of
441
CARE AND MAINTENANCE
Replace the fuser wick by following the steps below:
1.
Lift the access handle to lower the left cover.
2.
Grasp the old fuser wick by its handle. Pull firmly by the
handle and remove the fuser wick.
WARNING: The fuser wick area can be very hot.
3.
Discard the used fuser wick.
4.
Unpack the new fuser wick.
Caution: Do not touch the felt area on the underside of the
fuser wick.
5-50
XEROX 4213 LASER PRINTER USER GUIDE