Xerox 4213 User Manual - page 279
of
441
XEROX COAX/TWINAX OPTION
Installation procedures
The following steps guide you through the removal of the system
controller board, installation of the Coax/Twinax board, and
reinstallation of the system controller board.
System controller board removal
1. Locate the two thumb screws on the system controller
access cover plate. (Refer to figure A3-4 for location of this
plate.)
For steps 2 to 6, refer to figure A3-4.
Figure A3-4.
System controller board
A3-8
XEROX 4213 LASER PRINTER USER GUIDE