Xerox 4213 User Manual - page 118
PRINTING WITH THE 4213
Reading the XES font status sheet
The XES Font Status Sheet lists all the fonts that are currently
loaded and available for use with the emulation:
•
The font number is assigned by the printer to each font set.
A font is selected through the menu by its unique font
number. The numbers 1 through 4 are assigned to the four
resident font sets:
1: Titan10iso-P
2: Titan12iso-P
3: XCP14iso-L
4: XCP125iso-L
•
The font name identifies the font set. An example of a font
name is as follows:
Titan12iso-P: Resident font number 2
Titan
Represents the typeface
12
Represents the characters per inch
iso
Represents the International
Standards Organisation (ISO
encoding scheme)
-P
Represents print orientation (-P=
Portrait, -L=Landscape).
Note: Printer commands are case-sensitive. Upper-case and
lower-case letters must be exact. Enter the entire printer
command when selecting a font.
Additional fonts can be purchased in cartridge or downloadable
form.
•
Fonts are grouped on the status sheet according to their font
source. Fonts are listed in the following order:
—Resident fonts
—Left or Right Cartridge fonts, if present
—Downloaded fonts, if present.
Note: Downloaded fonts are removed from the memory of the
printer if you switch the printer off and when you change
emulations. When downloaded fonts are deleted, the default
font is the active font for the printer.
XEROX 4213 LASER PRINTER USER GUIDE
4-9