Xerox 4213 User Manual - page 18
INSTALLATION
Environmental conditions to avoid
You should avoid the following environmental conditions as you
plan the location of your printer:
•
Direct sunlight
•
Rapid temperature changes
•
Direct air flow
•
Heat-emitting devices
•
High temperature or humidity
•
Dust dirt, or poor ventilation
•
Volatile gas or liquids
General cautions
•
Do not put anything on the printer, such as: a flower vase, or
a filled cup or glass. Water inside the printer unit not only
results in malfunction, but also causes damage to the printer.
•
Do not drop paper clips or staples inside the printer unit.
This can cause a short-circuit or malfunction.
•
Do not apply mechanical shocks to the printer.
•
Do not use flammable aerosol products near the printer.
•
Do not disassemble or modify the printer
•
Never open covers which you are not intended to open.
•
Make sure the area is well ventilated, if the location of the
printer is in a closed or crowded room.
•
Turn off the power and unplug the power cable immediately
in you perceive smoke or an abnormal sound or odour.
Cautions while printing
•
While printing, do not turn off the power or open the top
cover or any of the doors. A paper jam or malfunction will
occur.
1-2
XEROX 4213 LASER PRINTER USER GUIDE