Xerox 4213 User Manual - page 378
POSTSCRIPT EMULATION
Output Offset
The Output Offset menu item determines whether or not
offsetting in the output tray is allowed. When Output Offset is
on and when the job asks for it, the individual job is offset from
the previous job in the output tray. This function is regulated by
the offset commands for PostScript.
If this item is off, no offsetting is allowed, even if the job asks for
it. PostScript commands to offset the output are ignored.
Disabling the output position allows more sheets to be stacked
in the output tray.
The Output Offset menu item options are listed below as they
appear in the message display:
OUTPUT OFFSET
OFF* (ON or OFF)
Wait Timeout
The Wait Timeout menu item allows you to choose whether the
printer continues printing automatically when a communication
error occurs.
If a Wait Timeout period is set, the printer pauses for the number
of seconds (20, 40, or 60) while displaying the error message,
then automatically continues printing.
If the Wait Timeout option is set to infinite, the printer pauses
and does not resume printing when an error occurs.
If you want the Wait Timeout period to be controlled by the
setting at your host computer, set the option through the input
stream.
The Wait Timeout menu item options are listed below as they
appear in the message display:
WAIT TIMEOUT
40 SECONDS* (20 SECONDS, 40 SECONDS, 60 SECONDS,
INFINITE or HOST DEFINED)
XEROX 4213 LASER PRINTER USER GUIDE
A4-21