Xerox 4213 User Manual - page 288
of
441
XEROX COAX/TWINAX OPTION
Termination switch position
18. The termination switch is found on the front plate of the
Coax/Twinax board. Refer to figure A3-11. Put it in one of
the following positions:
•
Up
-
Terminate line
•
Down -
Non-terminate line
Note: If you are working in the Coax environment, it is
recommended that you leave the termination switch in the up (or
terminate line) position.
Figure A3-11.
Termination switch position
The termination switch should be in the up position if there are
no other Twinax devices to be connected after it.
XEROX 4213 LASER PRINTER USER GUIDE
A3-17