Xerox 4213 User Manual - page 132
PRINTING WITH THE 4213
Selecting the bypass tray at the printer
If your application software does not provide the manual feed
option, you can select the bypass tray for manual feed at the
Main Menu.
Before submitting your print job, use the following buttons on
the control panel to access the Main Menu and to select BYPASS
as the current feed tray. First, make sure the display reads
EMULATION/XES* OR EMULATION/LJ2D*. Press the Test
B
button to display emulation selections, then press the Last
Page/[Right Arrow] button until you see XES or LJ2D/TRAY SEQ
MODE. Next press the Test
B
button once then the Last Page
C
until the display reads TRAY SEQ MODE/BYPASS. Press the
Select
D
button to select BYPASS as the feed tray you wish to
use.
Setting the bypass tray paper size at the Main Menu
The menu item called ADJ PAPER SIZE found in the Main Menu
allows you to select one of the standard paper sizes listed in
table 4-3. The selected paper size command is automatically sent
to the printer and the image is placed in the correct location on
the page.
XEROX 4213 LASER PRINTER USER GUIDE
4-23