Xerox 4213 User Manual - page 130
PRINTING WITH THE 4213
Last page is not ejected
If the Last Page indicator light is still lit after the printer activity
has stopped and no more pages are ejected, you must manually
eject the remaining page of the document. Simply press the Last
C
Page button to print and eject the last page of data.
H
Press the Online button to put the printer back online. (The
green online indicator light is lit.)
2-sided printing
The 4213 offers 2-sided capability as a standard feature. It is
capable of producing printed images from standard fixed size
paper trays extending to the full width and length of the paper
size except for a 3-mm border provided at the lead edge where
data is not printed.
The printer is configured for 1-sided printing. To print 2-sided
pages, make sure the display reads EMULATION/XES* OR
EMULATION/LJ2D*. Press the Test
B
button to display the
emulation options, then press the Last Page
C
button until XES
/DUPLEX or LJ2D/DUPLEX appears. Next press the Test
B
button
till DUPLEX/DISABLED* appears. Now press the Last Page
C
button to display the two sided printing mode you wish to use..
Press the Select
D
button to make you choice. Press the Online
H
button to put the printer back online, then submit your job.
Note: The use of 60-gsm (16-lb) paper is not recommended for
2-sided printing. 2-sided printing should not be done on 203 by
254 mm (8 by 10 inch) paper.
To return to the 1-sided printing mode
To return to 1-sided (simplex) printing, press the Online
H
button to take the printer off line, then immediately press the
Reset
G
button. Press the Last Page
C
button until RECALL USER
DFT is displayed. Now press the Select
D
button and the printer
will automatically return to online status with the 2-sided feature
disabled.
XEROX 4213 LASER PRINTER USER GUIDE
4-21