Xerox 4213 User Manual - page 333
XEROX COAX/TWINAX OPTION
Automatic New Page:
This menu option lets you decide whether or not the Last Line
Feed on a page can act as a Form Feed. When enabled, the
number of lines on the page will be counted. When the line
count equals the page length, a form feed will be generated.
When disabled, no additional Form Feeds will be inserted. Again
calculations will be based upon the page length which can be set
at the control panel and overridden by the appropriate IBM
command when operating in SCS mode.
AUTO NEW PAGE
ENABLED* (ENABLED or DISABLED)
Automatic New Line:
This menu option lets you select the autowrap function. When
this option is enabled, a New Line occurs automatically if any text
is found beyond the Maximum Print Position. When the option
is disabled, text beyond the Maximum Print Position is lost.
AUTO NEW LINE
ENABLED* (ENABLEDor DISABLED)
Auto Page orientation:
This menu option lets you choose between automatic tray
orientation based on host commands for all trays or default
orientation based on the default orientation setting of each tray.
The automatic tray orientation tray algorithm is similar to that
used by the IBM 3812/3816.
AUTO PAGE ORIENT
ENABLED* (ENABLED or DISABLED)
Tray 1 orientation:
This menu option lets you define the default page orientation for
tray 1.
TRAY 1 ORIENT
COR* (COR, PORTRAIT, or LANDSCAPE)
Tray 2 orientation:
This menu option lets you define the default page orientation for
tray 2.
TRAY 2 ORIENT
COR* (COR, PORTRAIT, or LANDSCAPE)
A3-62
XEROX 4213 LASER PRINTER USER GUIDE