Xerox 4213 User Manual - page 244
of
441
ADJUSTABLE TRAY
•
Make sure that the paper stack is under the fixed paper
snubber.
6.
Squeeze the two release latches. One is located at the
outside edge of the adjustable side guide and the other is
located on the inside floor of the the tray. Slide both
guides until they come in contact with the paper. Marks of
paper length and width are on the inside floor of the tray.
Your guide settings should match the paper size you are
using.
Close the tray cover.
Note: The stack of paper should be under both paper
snubbers at the lead edge of the stack.
XEROX 4213 LASER PRINTER USER GUIDE
A1-5