Xerox 4213 User Manual - page 295
XEROX COAX/TWINAX OPTION
D
15. Press the Select button to select the desired encoding. An
asterisk appears next to your selection.
A
16. Press and release the Menu button to re-display the XES
emulation menu options again, the display reads:
XES
DATA ENCODING
Setting line ending parameter
C
17. Press the Last Page button until the display reads:
XES
LINE ENDING
B
18. Press the Test button to display the currently selected line
ending option. The display reads:
LINE ENDING
NONE
*
C
If the display does not read as indicated in procedural step
number 18, press the Last Page button until the display
reads:
LINE ENDING
NONE
D
19. Press the Select button to select line ending option. An
asterisk appears next to your selection.
A
20. Press and release the Menu button to re-display the XES
emulation menu options again, the display reads:
XES
LINE ENDING
Setting language parameter
If data encoding is set to EBCDIC-SNA mode, continue with step
21. Otherwise, if data encoding is set to ISO6937 or EBCDIC-
DSC modes, jump to step 25 and continue:
C
21. Press the Last Page button until the display reads:
XES
LANGUAGE
A3-24
XEROX 4213 LASER PRINTER USER GUIDE