Abbott i-STAT 1 System Manual - page 287

13

Art: 725768-00E 

Rev. Date: 04-Jan-12

3.13:

When the update is in progress, the following screen will appear:

The handheld will have 1’s and 0’s streaming across the screen signifying that it is receiving the 

software.

Do not move the handheld until the success screen is displayed.

3.14: 

Run the Electronic Simulator in the handheld.  When the simulator finishes, PASS 

should be displayed.

Note: If PASS is not displayed, re-run the Electronic Simulator.  If the repeated Electronic Simu-

lator attempt fails, contact APOC Technical Support.  For additional information on running the 

electronic simulator, see Section 14 of the i-STAT 1 System Manual.

Congratulations.  The process for updating the first

i-STAT 1 handheld is complete.

If there are additional handhelds to be updated via JammLite:

• Click Close

•  Repeat steps

 3.11 through 3.14.

If there are no additional handhelds to update, the process is complete:

• Click the 

 button in the upper right corner of the software screen

• Proceed to step 3.15 to restart the RRC if it was disabled in Step 3.5

• Proceed to step 3.15 to update the RALS-Plus i-STAT/DE with the latest CLEW and 

JAMS software files