JBL AV2 User Manual - page 100

Appendix C

Harman Consumer Group, Inc.

C-6

•

Learned functions are automatically erased when a new

function is learned on the same button.

•

Learned functions are retained even after a different

pre-programmed three-digit manufacterer’s code is entered

and saved to the remote.

•

To return to an original preprogrammed function, the learned

function must be erased.

LOCK FEATURE

The AV2 remote control has a locking feature, which prevents

unauthorized use of the remote control. When the locking feature is

active, all operations of the remote control are blocked. This feature

can be used as a “child-lock” to prevent children from having

unmonitored access to the home theater system.

To Activate the Lock Feature:

Press and hold the +10 and ENT (Enter) buttons at the same time. After

three seconds, the bottom of the touch screen will blink “LOCKED”

three times and then “LOCKED” will remain displayed. The Lock is

now active.

To Return to Normal Operation:

While the remote is in the LOCKED condition, press and hold the +10

and ENT (Enter) buttons at the same time. After three seconds, the

“LOCKED” message is replaced by the last used mode is displayed. The

Lock is now deactivated.

ADVANCED CUSTOMIZING TOOLS

Once the basic setup to your remote is complete, you can use the

advanced features to further customize your AV2 remote control. The

advanced customizing tools include:

•

Backlight Options 

–

 Customize the backlight feature to suit

your preferences.

•

Touch  Screen 

–

 Customize the displayed text for each device

menu on the LCD touchscreen.

•

Favorite Channels 

–

 Set up your favorite channel list. Once this

list is set up, up to 40 favorite channels can be selected by the

press of a button 

–

 all without needing to remember or type in

a channel number.

•

Macros - Power all of your components ON or OFF at the same

time, with the press of one button. 

•

Remote Cloning 

–

 Clone other AV2 remote control from an

already setup remote.

•

Punch Throughs 

–

 Force buttons to work for specific devices,

regardless of the device currently selected on the AV2 remote

control.

•

Hiding and Adding Pages 

–

 Customize the visible pages on the

touchscreen display.

Backlight Time Out:

The backlight feature lights the touchscreen area and illuminates the

buttons whenver the Light button is pressed. The amount of time the

backlight remains on before timing out can be adjusted to your

preferences. Follow the instructions below to change the back light

time-out setting.

1. On the remote control, press and hold the MAIN and ENT (Enter)

buttons at the same time. After about three seconds, “SETUP” is

displayed in the Menu name area at the top of the LCD

touchscreen. This is the Setup mode of the remote control.

NOTE: You now have 30 seconds to perform the next step while the

remote is in the Setup mode. If a button is not pressed within 30

seconds, the SETUP menu name will revert to MAIN, indicating that

the remote control is no longer in Setup mode. If this occurs, you will

need to repeat this step to re-enter the Setup mode.

2. Touch the menu page   arrow to access the second page of the

SETUP menu.