JBL AV2 User Manual - page 19
JBL
®
Performance™ Series AV2 Audio/Video Processor
Basic Operation
2-9
AV2 MENU OVERVIEW
When the remote control touchscreen is in the
“JBL” or “ZONE 2” menu layers, pressing MENU
or SELECT on the AV2 remote control accesses
the menu controls for the AV2 processor. The
MAIN MENU is the root directory of the AV2
menu structure and has three branches: AUDIO
CONTROLS, VIDEO STATUS and SETUP.
The AUDIO CONTROLS menu controls the audio-specific parameters,
such as treble and bass, as well as providing an audio status menu. For
more information, refer to
Section 4: Audio Controls and Video Status
.
The VIDEO STATUS menu is an information-only menu identifying
the current video status of the AV2 Processor. For more information,
refer to
Section 4: Audio Controls and Video Status
.
The SETUP menu controls all aspects of setting up the AV2 processor.
Refer to
Section 3: Setup
for more information.
The AV2 menu structure can be viewed on the OSD (On-Screen
Display), which is a 480i or 480p video output signal to your monitor,
or on the front panel two-line display, which displays the menus one
line at a time using the remote control navigation controls. The front
panel two-line display can also be viewed on the OSD, in 480i
resolution only.
Note: When the AV2 menu structure is entered, most front panel buttons
and the remote control buttons are disabled until the menu structure is
exited. The exceptions are the Volume Knob and Standby button on the
front panel and the remote control Volume, Mute, and Off buttons. Note
also that the disabled condition of the remote control only affects the
“JBL” and “ZONE 2” menu layers.
MENU NAVIGATION
Use the remote control arrow buttons to navigate the AV2 menu
structure, shown in detail in
Appendix B
. The Command Matrix
table located later in this chapter indicates the navigation
commands that the remote control buttons perform when the AV2
command bank is activated by selecting the “JBL” or “ZONE 2”
options on the remote control touchscreen.
MAIN MENU
AUDIO CONTROLS
VIDEO STATUS
SETUP
Arrow
Navigation Functions
(for “JBL” and “ZONE 2” menu layers)
When a menu is open, press the remote control
arrow to
select the highlighted menu parameter. The menu parameter
will blink to indicate that it is selected.
When a menu is open, press the
arrow to close the current
menu and, in most cases, open the previous menu. Subsequent
presses continue to close the current menu and open the
previous menu until the MAIN MENU is closed.
When a menu is open, press the
and
arrow buttons to scroll
upward and downward through the complete list of menu param-
eters. The highlighted menu item appears in the front panel
display. All menu items appear in the OSD. The cursor
automatically wraps to the next menu parameter when the first or
last menu item is passed.
When a menu parameter is selected and blinking, press the
and
arrow buttons to scroll through the available parameter
options.
SELECT
Press the Select button to open the menu structure, open a menu
branch, or select a menu parameter.
MENU
Press the Menu button to open the menu structure.
EXIT
When the menu is open, press the Exit button to leave the menu.
Unlike the
arrow button, which closes a menu layer, the Exit
button completely closes the menu structure.