JBL AV2 User Manual - page 87
JBL
®
Performance™ Series AV2 Audio/Video Processor
Appendix A
A-3
*Depth measurement includes knobs, buttons and terminal connections.
**For use with optional RF-1 receiver.
Specifications are subject to change without notice.
Main Zone and Zone 2 Audio Performance
A/D Conversion
24-bit, 96kHz, dual-bit
ΔΣ
D/A Conversion
24-bit, 44.1 to 192kHz, multi-bit
ΔΣ
Input Sensitivity
200mV for Analog 1 to 6, and 200mV for 8-ch input
max input level: 2Vrms
Input Impedance
98.5k
Ω
for Analog 1 to 6, and 32k
Ω
for 8-ch input
Frequency Response
10Hz to 40kHz, +0, –2dB
THD + Noise
Dynamic Range
100dB typical, 22kHz bandwidth
Signal-to-Noise Ratio 100dB typical, 22kHz bandwidth
min 100dBA, 103dBA typical
Output Level
200mV typical, 6Vrms maximum
Output Impedance
570
Ω
General
Power Requirements
90-250VAC, 50-60Hz, 50W (Universal line input)
IEC detachable power cords (supplied)
Power Consumption
3.76W at Power on, idle
47.2W at rated power output (HDMI in/out mode)
Dimensions
• Height (with feet): 5.0 inches (127mm)
• Height (without feet): 4.3 inches (109mm)
• Width: 16.8 inches (426mm)
• Depth*: 16.7 inches (423mm)
Weight
• Net Weight: 17.6 lb (8 kg)
• Gross Weight: 26.5 lb (12 kg)
Rack-Mounting
JBL-built rack-mount kit not available. Custom rack-mount
shelf available from Middle Atlantic RSH Series. Please
contact Middle Atlantic for ordering information.
Operating
Environment
• Operating temperature: 0 to 45 C (32 to 113 F)
• Storage temperature: –20 to 60 C (–4 to 140 F)
• Relative humidity: 93% max without condensation
Remote Control
Hand-held, backlit, IR/RF** preprogrammed and learning
remote control (requires 4 AAA batteries – included)