JBL AV2 User Manual - page 108

Appendix C

Harman Consumer Group, Inc.

C-14

OPTIONAL RF RECEIVER 

The optional RF receiver utilizes the RF feature of the JBL remote

control, allowing you to control components that are completely out

of sight, up to 100 feet away. Since the RF receiver picks up the AV2’s

remote control radio frequency signal, the remote control no longer

needs to be pointed directly at the components to control them. Now

you can close your entertainment center doors, hide your components

and still control them with ease. 

The RF receiver accessory requires no setup to the AV2 remote control

in order for the feature to work 

–

 you need only place the RF receiver in

the rack or cabinet, or attach an emitter to the AV2 front panel over the

IR receiver. Every time a command is sent from the remote control, it

sends both a standard IR and an RF signal. The RF receiver

automatically receives the remote’s radio signals and translates them

into the infrared commands that control the components.

Note: The AV2 remote control radio signals will not control components

directly. You must have the RF receiver installed to receive the remote’s

radio signals. Components that came with “no pointing” radio remote

controls cannot be operated by the JBL remote unless the component can

be switched to standard IR via its internal menus. Some remote control

ceiling fans are radio only and cannot be operated by the JBL remote.

USING THE THREE-DIGIT CODE LIBRARY

The following pages contain the code library for the three-digit

preprogrammed manufacturers’ codes for most home theater

equipment. The code library is divided into categories, such as TV and

VCR. Each category may include several different types of components. 

The categories, and the types of components each category includes,

are:

•

TV 

–

 TVs, Plasmas, Projectors and Monitors

•

CABLE 

–

 Cable TVs and Web TVs

•

DVD 

–

 DVD Players and TV/DVD combos

•

VCR 

–

 VCRs and TV/VCR combos

•

AUDIO 

–

 Amps, Preamps, A/V Receivers and XM® Radios

•

SAT 

–

 Satellite Receivers

•

CD 

–

 CD Players and CD Changers

•

DVR 

–

 TiVo, Replay and other DVRs

•

LDP 

–

 Laser Disc Players

•

LIGHT 

–

 Lighting Systems and Dimmers

•

TAPE 

–

 Tape Decks

•

PHONO 

–

 Phonographs

•

AUX 

– 

Multimedia PCs, Xbox, iPod Controls and Custom

Installation Products

Within each category, the code numbers are listed in rows by brand,

such as the JBL and Samsung brands. Some brands have more than

one three-digit code for you to try.