JBL AV2 User Manual - page 86
Appendix A
Harman Consumer Group, Inc.
A-2
SPECIFICATIONS
Inputs
HDMI (Version 1.1)
2 HDMI Type A, 19-pin connectors
Analog Video
• Three component video, RCA connectors
• Four S-video connectors
• Four composite video, RCA connectors
Digital Audio
• Four S/PDIF coaxial (RCA) and four S/PDIF optical
(TOSLINK) connectors
• Coaxial and optical input connectors conform to IEC-
958, S/PDIF standards
• One USB mini-B connector
Analog Audio
• One 8-channel input array, RCA connectors
• Six stereo RCA connectors
• One microphone, 3.5mm mono mini plug
• 1 Dock 30-pin connector (for optional Docking station)
Control
• One RS-232, 9-pin, D-sub connector
• One IR receiver, on front panel
• One 3.5mm IR IN jack:
Input Voltage: 3V – 15V
Input Current: 10mA
Frequency: 20Hz -– 1KHz
Accepts either stereo plug (Tip/Ring/Sleeve) or mono
plug (Tip/Sleeve)
Outputs
HDMI (Version 1.1)
One HDMI Type A, 19-pin connector
Analog Video
• One component video, RCA connector
• One S-Video connector
• One composite video, RCA connector
Analog Audio
• One 8-channel preamplifier plus additional subwoofer,
RCA connectors
• Zone 2 Analog Out: 1 RCA Stereo connector
Control
Two triggers -– one power on/off and one programmable
3.5mm mono mini plugs
12VDC, 300mA maximum output draw
HDMI Performance
HDMI Input
Video: 480i/p, 576i/p, 720p or 1080i
Audio: Dolby Digital, DTS and PCM (32, 44.1, 48, 88.2,
96kHz, 176.4kHz and 192kHz)
HDMI Output
Video: 480i/p, 576i/p, 720p or 1080i
Audio: Dolby Digital, DTS and PCM (32, 44.1, 48, 88.2,
96kHz, 176.4kHz and 192kHz)
S-Video and Composite Video Performance
Compatibility
NTSC, PAL and SECAM
A/D Converter
12-bit, 110MHz
D/A Converter
12-bit, 74.25MHz
Input Level /
Impedance
1V peak-to-peak/75
Ω
Output Level /
Impedance
1V peak-to-peak/75
Ω
Frequency Response
Composite: 10Hz to 8MHz, –3dB
S-Video: 10Hz to 8MHz, -3dB
Component: 10Hz to 100MHz, –3dB
Signal-to-Noise Ratio >65dB
Differential Gain
Differential Phase
Gain
+/– 0.15dB
Component Video Performance
Compatibility
3-Channel (Y, Pr, Pb), format-independent
Impedance
75
Ω
Insertion Loss
Bandwidth
>100MHz