JBL AV2 User Manual - page 59
JBL
®
Performance™ Series AV2 Audio/Video Processor
Setup
3-33
MUTE LEVELS
Selecting the SETUP menu, MUTE LEVELS option opens the Mute
Levels menu, which is used to adjust the mute levels of both the Main
Zone and Zone 2 audio outputs.
MAIN ZONE
FULL, –10, –20, –30, –40dB
Allows you to choose different levels of attenuation for Main Zone
audio muting. The FULL setting completely mutes the box. The other
available settings perform incremental muting.
ZONE 2
FULL, –10, –20, –30, –40dB
Allows you to choose different levels of attenuation for Zone 2 audio
muting. The FULL setting completely mutes the box. The other
available settings perform incremental muting.
POWER ON SETTINGS
Selecting the SETUP menu, POWER ON SETTINGS option opens the
Power On Settings menu, which provides user preferences to the
Power On Volume and Dock Auto Power settings.
POWER ON VOL
LAST, –80dB TO –10dB
Identifies the starting volume level when the AV2 is powered on. The
Last parameter sets the volume to the same volume that existed
when the unit was put into Standby or powered off from the rear
panel switch. The Power On Volume can be set from –80dB to –10dB
in 1dB increments.
DOCK AUTO POWER
OFF, ON
If the Dock Auto Power parameter is set to ON, then if an iPod is
playing when plugged into the dock, it will take the AV2 out of
Standby mode and select the Dock input. If the Dock Auto Power
parameter is set to OFF, then the AV2 does not respond when a
MAIN MENU
AUDIO CONTROLS
VIDEO STATUS
DISPLAY SETUP
SPEAKER/EQ SETUP
INPUT SETUP
SURROUND CONFIG
DOLBY CONFIG
MUTE LEVELS
POWER ON SETTINGS
SETUP
SETUP
MUTE LEVELS
MAIN ZONE: -30dB
ZONE-2: -30dB
BASSQ*: NO
*CHECK MANUAL FIRST
MUTE LEVELS
SETUP
MAIN ZONE
MUTE LEVELS
SETUP
ZONE-2
MAIN MENU
AUDIO CONTROLS
VIDEO STATUS
DISPLAY SETUP
SPEAKER/EQ SETUP
INPUT SETUP
SURROUND CONFIG
DOLBY CONFIG
MUTE LEVELS
POWER ON SETTINGS
SETUP
SETUP
POWER ON SETTINGS
POWER ON VOL: -30dB
Dock AUTO POWER: ON
BASSQ*: NO
*CHECK MANUAL FIRST
POWER ON SETTINGS
SETUP
POWER ON VOL
POWER ON SETTINGS
SETUP
Dock AUTO POWER