JBL AV2 User Manual - page 56
Setup
Harman Consumer Group, Inc.
3-30
SURROUND CONFIGURATION
Selecting the SETUP menu, SURROUND CONFIG option opens the Surround Configuration menu, which is used to customize the list of available
listening modes that can be applied to incoming signals. Each Mode Family has a subset of available listening modes that can be turned off. If the
listening mode is set to OFF, then the applicable listening modes in that family are not available for selection from the mode buttons. If the listening
mode is ON, then the applicable listening modes in that family are available for selection.
These are not input-specific settings; if a Mode Family option is turned off, it is removed from the list of available listening modes for ALL inputs, and
regardless of the incoming data stream. Some modes, such as Dolby Digital, DTS and the Stereo modes in the PCM menus, cannot be excluded
from the mode selections.
Note: The Logic 7 Default parameter is the one exception in the Surround Configuration menu
–
this parameter has different functionality, as described on the
following page.
DOLBY VIRTUAL: OFF
STEREO DOWN MIX: ON
DOLBY MULTI-CHANNEL
LOGIC 7: ON
HALL: ON
5/7 CH STEREO: ON
DTS-ES DISCRETE: ON
LOGIC 7: ON
SURROUND CONFIG
LOGIC 7 DEFAULT: ON
DOLBY MULTI-CHANNEL
DOLBY 2.0
DTS
PCM 44.1/48 kHz
PCM 96kHz
MAIN MENU
AUDIO CONTROLS
VIDEO STATUS
DISPLAY SETUP
SPEAKER/EQ SETUP
INPUT SETUP
SURROUND CONFIG
DOLBY CONFIG
MUTE LEVELS
POWER ON SETTINGS
SETUP
SETUP
DOLBY PLII: ON
DOLBY VIRTUAL: OFF
DOLBY 2.0
DOLBY PLIIx: ON
DTS 96/24: ON
DTS-ES MATRIX: ON
DTS
DTS NEO:6: ON
LOGIC 7: ON
STEREO DOWN MIX: ON
DOLBY VIRTUAL: OFF
LOGIC 7: ON
DOLBY PLIIx: ON
PCM 44.1/48 kHz
DOLBY PLII: ON
DTS NEO:6: ON
5/7 CH STEREO: ON
LOGIC 7: ON
DOLBY PLIIx: ON
PCM 96kHz
DOLBY PLII: ON
DTS NEO:6: ON
BASSQ*: NO
*CHECK MANUAL FIRST