JBL AV2 User Manual - page 64
Audio Controls and Video Status
Harman Consumer Group, Inc.
4-4
AUDIO STATUS
The AUDIO STATUS menu is an information-only menu identifying
the current audio status of the AV2.
•
INPUT identifies the currently selected input.
•
NAME identifies the customer-chosen name, if any, for the
currently selected input.
•
CONNECTOR identifies the current audio connector in use.
•
AUDIO identifies what type of audio signal is in use.
•
MODE FAMILY identifies the currently selected mode family.
•
MODE identifies the currently selected listening mode.
Note: The Audio line is dashed out if the audio input is analog.
VIDEO STATUS
The VIDEO STATUS menu is an information-only menu identifying
the current video status of the AV2.
•
INPUT RESOL identifies the current input resolution setting.
•
COPY PROTECTION identifies the current status of copy
protection.
•
V-PROCESS identifies the current setting of the video processor.
•
OUTPUT RESOL identifies the current output resolution setting
of the HDMI and Component outputs.
Note: The HDMI and component output resolution values are always
the same, unless copy protection is active. In some cases,
copy-protected inputs can restrict the component output format
options.
•
COMPONENT OUT identifies the currently selected
component output status as described below.
•
S-VIDEO OUT identifies the currently selected S-video output
status as described below.
•
COMPOSITE OUT identifies the currently selected composite
output status as described below.
The Component, S-Video and Composite Out parameters all reflect
the interaction between the input type (which is not listed in the
Video Status menu), the copy-protection status, the video process
parameter setting and the current output resolution.
Therefore:
•
COMPONENT OUT displays “OFF” if the component output is
disabled for the current video input and processing
configuration. Otherwise, it displays “Enabled”.
•
S-VIDEO OUT displays “OFF” if the S-video output is disabled
for the current video input and processing configuration.
Otherwise, it displays the current output resolution.
•
COMPOSITE OUT displays “OFF” if the composite output is
disabled for the current video input and processing
configuration. Otherwise, the current output resolution is
displayed.
AUDIO CONTROLS
AUDIO STATUS
INPUT: HD+
NAME:
CONNECTOR: ANALOG 3
AUDIO: - - -
MODE FAMILY: LOGIC 7
MODE: MUSIC 5.1
VIDEO STATUS
INPUT RESOL: - - -
VIDEO STATUS
COPY PROTECTION: OFF
V-PROCESS: FAROUDJA
OUTPUT RESOL: - - -
COMPONENT OUT: 480i
S-VIDEO OUT: OFF
COMPOSITE OUT: OFF