JBL AV2 User Manual - page 57
JBL
®
Performance™ Series AV2 Audio/Video Processor
Setup
3-31
LOGIC 7 DEFAULT
OFF, ON
Allows the user to choose the Logic 7 mode as the default surround
mode for all incoming audio signals. If this parameter is OFF, then
the AV2 selects the native format of the incoming signal as the
default listening mode. If set to ON, then all incoming audio signals
are defaulted to the Logic 7 listening modes.
Setting the Logic 7 Default to ON does not prevent other listening
modes from being available through the Mode buttons. Selecting
the DOLBY, DTS, DSP or STER soft button on the remote control
switches the Mode menu selections to any listening modes available
for those families.
Note: The Logic 7 Default is the only menu item in the Surround Config
menu that has different functionality.
SURROUND CONFIG
SETUP
LOGIC 7 DEFAULT