Riso rz 510 User Manual - page 101
Advanced Features
Changing Default Settings [Admin.]
99
[Default]
Image Processing
Change the default setting for the “image processing
mode”.
Line
/Photo/Duo (Text and
Photo)/Pencil
Scanning Contrast
Change the default setting for the “scanning contrast”.
1, 2, 3, 4, 5,
Auto
Print Speed
Change the default setting for the “print speed”.
1, 2,
3
,4 ,5
Print Density
Change the default setting for the “print density”.
1, 2,
3
,4 ,5
OP Auto Process
Change the default setting for the “Auto Process” when
an optional ADF unit or Job Separator is installed.
ON
, OFF
ADF Semi-Auto
Change the default setting for the “ADF Semi-Auto”
when the ADF unit (option) is installed.
ON,
OFF
Auto Process Mode
Change the default setting for the “Auto Process”.
ON,
OFF
Job Separation
Change the default setting for the “Job Separation”
when the Job Separator (option) is installed.
ON,
OFF
Jump Wing Control
Change the default positioning of the Paper Jumping
Wing.
Important!:
• This option is available only when the special paper
setting is pre-configured. Contact your dealer (or
authorized service representative) to pre-configure
this setting.
ON,
OFF
[System]
Custom Paper Entry
Specify paper dimensions before using non-standard
sized paper.
)
p.109
Base IP Address
Set the IP address for connecting the machine to a
network.
IP address settings differ depending on the type of
network.
Note:
• To change an input source, touch the applicable
box, or press the
key to rotate options.
• When using a DHCP server
[Use DHCP]
• When entering IP address
manually
[Manual Input]
or the Print Quantity
Keys.
Margin-Plus Rate
Specify default size-reduction rate for the “Margin+”
setting.
90 to 99 %
(Factory default is 94%)
Display Access
Button
Functions
Description
ORCH_ML_EN.book Page 99 Wednesday, November 10, 2004 7:32 PM