Riso rz 510 User Manual - page 67
Functions for Printing
Adjusting the Print Position [Print Position Adjustment]
65
Horizontal (Left/Right) Adjustment
1
Press the Feed Tray Descent Button
to lower the Paper Feed Tray.
2
Turn the Horizontal Print Position
Adjustment Dial to move horizon-
tally (left or right).
Turning clockwise
Paper: moves to right
Print Position: moves to left
Turning counter-clockwise
Paper: moves to left
Print Position: moves to right
Check the amount of offset from the center by
looking at the gauge beside the Paper Feed
Tray. (Horizontal adjustment cannot be
checked on the Display.)
indicates center on the gauge. Press the
key to verify positioning by proof copy.
Important!:
• Be sure to adjust the Receiving Tray Paper
Guides after moving left or right.
)
p.31
• Be sure to re-position the Paper Feed Tray
to center after printing is completed.
ORCH_ML_EN.book Page 65 Wednesday, November 10, 2004 7:32 PM