Riso rz 510 User Manual - page 168
Troubleshooting
Troubleshooting
166
The back of the printed card is
peeling, or the leading edge
gets wrinkled.
The angle of the Stripper Plate is in
appropriate
Turn the Stripper Plate Angle Adjustment
Dial to adjust the angle.
An error message displays
even though there is no paper
jam.
Is the lifted paper getting ejected at
the second rotation of the Print
Cylinder (Drum)?
Check the printed copy, and if the top
margin is less than
3
/
16
" (5 mm), slightly
lower Print Position.
Is sunlight directly hitting the
machine?
The sensor is affected by direct sunlight.
Install shades or curtains, or move the
machine out of direct sunlight.
When printing a multiple page
computer file, the machine
repeats the master-making
process one page at a time.
Is “Print in Units” option selected in
the Printer Driver?
Delete the current print job. Deselect “Print
in Units”, and resend the data to the
machine.
See
)
p.38, step 3.
)
p.41
The computer sent the file, but
it was not received by the
machine.
Is the Admin. screen currently
showing on the display?
Touch
and switch to the Basic Screen
from the Admin. screen.
The
key is blinking.
Received data is waiting for output?
Press the
key and proceed to print.
Problem
Possible Cause
Action
ORCH_ML_EN.book Page 166 Wednesday, November 10, 2004 7:32 PM