Riso rz 510 User Manual - page 65
Manual is about: rz series
of
178
Functions for Printing
Adjusting the Print Density [Print Density Adjustment]
63
Adjusting the Print Density
[Print Density Adjustment]
You can select the print density from five levels.
The print density may be adjusted while printing is in progress.
Important!:
• “Print Density” is not available when [Ink Saving] is selected.
)
p.53
Note:
• The default print density can be set on the Admin. screen.
The factory default is set at level 3 (Standard).
)
p.99
Press the
or
key to adjust the
print density.
1) Print Density Indicator
Shows the current print density.
2)
Key
Increases the print density incrementally.
3)
Key
Decreases the print density incrementally.
ORCH_ML_EN.book Page 63 Wednesday, November 10, 2004 7:32 PM