Riso rz 510 User Manual - page 27
Getting Acquainted
Display
25
Printing from a Computer Data
1)
Tab Area
(“Selections” and “Admin.” tabs are disabled)
Touch a tab to display its screen.
2)
Job Properties Area
Properties of the current print job is displayed.
Refers to the computer data ready for print output.
3)
Job Operation Area
•
[Renew Page]
: Create another master when current
one is damaged or compromised, without having to
download data from the computer.
•
[Skip Page]
: Stops processing the current page and
moves on to process the next page.
•
[Clear All]
: Stops the current process altogether.
4)
Paper Button
)
p.49
5)
Auto Print
A printing operation can be set to stop at certain points.
(overrides driver settings)
6)
Optional Device Area
Displays when an optional device is attached.
Touch to activate.
7)
Status Area
Displays the current status of the machine and its Linked
Printer (sold separately).
This area shows the same information as that on the
“Printing from the Original Document” screen. (
)
p.24)
Note:
• Depending upon the usage environment, some of the “Admin.” features may not be available (“Admin.” tab may not
be displayed). Consult your dealer (or authorized service representative) for details.
• For information on other screens and their functions or settings, refer to corresponding pages.
Buttons on Touch Screen
Select buttons by lightly touching with a finger.
Touch again to cancel the selection. Avoid pressing with excessive force.
Not Selected.
Frequently Used Buttons
Selected.
Activates/Executes a setting.
Buttons in gray cannot be
selected.
Cancels a setting.
Closes a current window.
Press a button with a + on the right
side to expand options or display
Setup screens.
Switch
pages.
Increases/decreases
selected
values
(numbers, location, etc.).
Scrolls through screens.
ORCH_ML_EN.book Page 25 Wednesday, November 10, 2004 7:32 PM