Riso rz 510 User Manual - page 57
Manual is about: rz series
of
178
Functions for Master-Making
Printing Side-by-Side on One Sheet [2 Up] [2 in 1]
55
Tips for Multi-Up Printing
Follow these tips when using “Multi-Up (2 Up or 2 in 1)”.
Orientation of print paper
Always place paper in the Paper Feed Tray as shown below.
Orientation of originals
Always place the original on the Stage Glass or into the ADF unit (option) as shown below.
Margin
Leave a margin of at least
3
/
16
" (5 mm) on the top edge of the Stage Glass. Allowing a proper margin is critical in
well-balanced 2 Up positioning.
)
p.12
Note:
• The margin on the top edge (
3
/
16
" (5 mm)) will not be enlarged or reduced.
Make sure to allow margin space here
ORCH_ML_EN.book Page 55 Wednesday, November 10, 2004 7:32 PM