Riso rz 510 User Manual - page 124

When using a Linked Printer (sold separately)

Printing Scanned Original from a Linked Printer [Link Mode]

122

Note:

• To change the number, press the 

 key, 

then re-enter the correct number.

6 

Press the 

 key.

The scan of the original begins.

The scanned original data is sent to the Linked 

Printer, and the specified number of copies is 

printed from the Linked Printer. 

Note:

• The current settings can be stored in Job Mem-

ory for future retrieval of the same settings.

)

p.81

7 

Press the 

 key when the print job 

is complete.

The setting returns to its default value.

Tip:

When multiple Linked Printers are connected 

to the network

When multiple Linked Printers are connected to 

the network, output device can be selected as 

needed.

To output to another Linked Printer, follow the 

steps below:

1) 

Touch 

[Printer Name]

 in the Link Basic 

Screen.

2) 

Select the Linked Printer to print from.

Note:

• If a Linked Printer is experiencing an error, 

that device is not available to be selected. 

3) 

Touch 

[OK]

.

Note:

• If an error occurs on the selected Linked 

Printer while in Link Mode, the Link Sw. 

screen opens. Reselect another Linked 

Printer currently available for printing. 

For information on purchasing additional 

Linked Printers, contact your dealer (or 

authorized service representative).

ORCH_ML_EN.book  Page 122  Wednesday, November 10, 2004  7:32 PM