Riso rz 510 User Manual - Basic Operations

Preparing to Print

28

Basic Operations

Preparing to Print

First, set up the Paper Feed Tray and Paper Receiving Tray of the machine.

Important!:

• Do not use unsuitable paper, or mix paper of different sizes.

Doing so can cause paper jams and damage the machine.

)

p.12

Setting up the Paper Feed Tray and Loading Paper

1 

Turn the power ON.

2 

Open the Paper Feed Tray.

Pull the Paper Feed Tray to open until it comes to 

a rest.

3 

Load paper.

1) 

Place paper in the printing orientation.

2) 

Slide the Feed Tray Paper Guides to fit to the 

sides of the paper. Then turn the right and left 

Feed Tray Paper Guide Levers to lock the 

guides. 

: Unlock

: Lock

Important!:

• Make sure that the Feed Tray Paper Guides fit 

tight up against the paper. 

Failure to do so can produce undesired results.

Note:

• Custom size paper must be registered on the 

Admin. screen before use. 

)

p.109

Failure to do so may create an incomplete mas-

ter. 

ORCH_ML_EN.book  Page 28  Wednesday, November 10, 2004  7:32 PM