Riso rz 510 User Manual - page 35
Basic Operations
Printing from a Paper Document or Book
33
Printing from a Paper Document or Book
The steps for scanning an original for printing is explained below.
Note:
• See “When using a Linked Printer (sold separately)” (
)
p.35) to print from a Linked Printer (sold separately) with
Auto-Link function.
1
Make sure the machine is ON.
Check the Control Panel.
Note:
• When the power is OFF, both the Display and
the
key are off. Turn the power ON.
• If the
key is lit, the machine is in Energy
Saving mode. Press the
key to cancel
Energy Saving mode.
2
Check for printing paper.
Make sure paper is loaded.
To load or to change the paper, see the following
page:
)
p.28
After replacing with paper of a different size,
adjust the position of the Receiving Tray Paper
Guides and Paper Stopper.
)
p.31
3
Check the Display.
• If current screen is in Mode Selection, touch
[MasterMake]
to switch to the Master Making
Basic Screen.
The following screen appears.
• Make sure either the Master Making Basic
Screen or Print Basic Screen is displayed, and
go to step 4.
Note:
• When you see
[Data-Map]
in the Status Area,
the machine is busy receiving electronic data
from the computer. Please wait a moment.
• If you see Link Basic Screen, press the
key to switch to Master Making Basic Screen.
ORCH_ML_EN.book Page 33 Wednesday, November 10, 2004 7:32 PM