Riso rz 510 User Manual - page 128

When using a Linked Printer (sold separately)

Duplex Printing [Duplex]

126

Duplex Printing

[Duplex]

Double-sided printing is possible when a Duplex Unit (Option) is installed to a Linked Printer.

Note:

• The “Duplex” settings can be made from either Master Making or Print Functions screens. 

Linked Printer will print following the specifics set via either of these screens.

1 

Touch [Duplex] on the Functions 

Screen.

2 

Set duplex binding direction.

Set the binding direction as shown below. The 

combination of scanning orientation and binding 

direction will result in different styles. 

Scanning orientations and duplex 

binding directions

3 

Select the number of originals.

When scanning an original from the ADF unit 

(option), select either 

[Even]

 or 

[Odd]

 numbers to 

match the number of original sheets.

Important!:

• This step is not necessary unless using the 

ADF unit. Continue on to step 4.

4 

Touch [OK].

Note:

• To cancel Duplex Printing, touch 

[OFF]

 then 

[OK]

.

Original

Orientation

Vertical 

(Portrait)

Horizontal 

(Landscape)

Binding 

Direction

Long Edge

Short Edge

ORCH_ML_EN.book  Page 126  Wednesday, November 10, 2004  7:32 PM