Riso rz 510 User Manual - page 71

Functions for Printing

Ejecting Paper Using Pre Configured Setting [Jump Wing Control]

69

Ejecting Paper Using Pre Configured Setting 

[Jump Wing Control]

The following steps retrieves pre-configured custom settings for the Paper Jumping Wing. Use this feature to eject 

certain printing paper that is hard to eject with automatically adjusted normal Paper Jumping Wing setting.

Important!:

• “Jump Wing Control” feature is not available unless pre-config-

ured.

• Only one setting can be pre-configured.

• To pre-configure or to change settings, please contact your dealer 

(or authorized service representative). 

Note:

• The Paper Jumping Wing is a device which helps eject printed 

paper onto the Paper Receiving Tray. 

It automatically adjusts according to the position of the Paper Feed Pressure Adjustment Lever (standard or thick).

1 

Touch [Functions] on the Print Basic 

Screen.

2 

Touch [Jump Wing Control].

“Jump Wing Control” is selected.

ORCH_ML_EN.book  Page 69  Wednesday, November 10, 2004  7:32 PM