Riso rz 510 User Manual - page 147
Troubleshooting
When a Message Displays
145
T00-000:Service Call Error (in alphabetical order)
A00-000:Paper Jam Errors (in alphabetical order)
Message
Possible Cause
Action
!!Battery Replacement!!
Call Service
The battery is low or depleted.
Contact your dealer (or authorized service
representative) and have the battery
replaced.
Press the
key or the
key to clear
the error message display.
!!System Error!!
Press Reset Key
If Recovery has Failed, Call Service
A system error has occurred.
Press the
key.
If the problem persists, contact your dealer
(or authorized service representative).
!!System Error!!
Turn Main Power SW OFF Then ON
If Recovery has Failed, Call Service
Shut off power, then restart.
If the problem persists, contact your dealer
(or authorized service representative).
Message
Possible Cause
Action
Master Disposal Error
Pull Out Print Cylinder and
Discard Master
The master was not properly
discarded.
1)
Pull out the Print Cylinder (Drum) and
remove the master from the cylinder
(drum).
)
p.135
2)
Return the Print Cylinder (Drum) in
place.
3)
Press the
key.
Master Jammed in Disposal Unit
Pull Out Master Disposal Box and
Remove Jammed Master
The master is jammed in the
Master Disposal Unit.
Pull out the Master Disposal Box and
remove the jammed master.
)
p.134
If the error persists, contact your dealer (or
authorized service representative).
Master Loading Error
Pull Out Print Cylinder and
Discard Master
The master did not properly
attach to the Print Cylinder
(Drum).
1)
Pull out the Print Cylinder (Drum) and
remove the master from the cylinder
(drum).
)
p.135
2)
Return the Print Cylinder (Drum) in
place.
3)
Press the
key.
Master Mis-Feed
Pull Out Master Making Unit and
Rewind Master Roll, then
Reset Master in Place
The master is improperly
installed.
Pull out the Master Making Unit, rewind
the master and reinstall.
)
p.129
ORCH_ML_EN.book Page 145 Wednesday, November 10, 2004 7:32 PM