Riso rz 510 User Manual - page 48
Functions for Master-Making
Enlarging/Reducing Originals [Standard Ratio] [Margin+] [Zoom]
46
Enlarging/Reducing Originals
[Standard Ratio] [Margin+] [Zoom]
The document can be printed enlarged or reduced. The following methods can be used to enlarge/reduce the origi-
nal.
Standard Ratio
Enlarging or reducing a standard-sized original (Letter, Legal, A4, B5 etc.) to print in another standard size.
Margin+
Reducing the original slightly. This feature is useful when allowing binding margins, or when text or diagram
extends beyond the printing area.
)
p.15
Specify reduction rate of 90%-99% on the Admin. screen.
)
p.99
Zoom
Allows you to specify numerical resize ratio.
Specify the zoom ratio between 50% and 200% in increments of 1%.
Note:
• To avoid paper jam, flipping or ink smudges on the back side by design the machine does not print too close to the
edge. The top edge in particular needs
3
/
16
" (5 mm) of margin space.
)
p.15
3
/
16
" (5 mm) wide area on the top edge (marked
) of the Stage Glass (or the ADF unit) cannot be scanned,
regardless of enlargement or reduction settings.
• Do not position the original within
3
/
16
" (5 mm) of the top edge, or the top edge of its printed image will be cut off.
This
3
/
16
" (5 mm) margin will remain even in the “Max. Scan” setting.
)
p.94
• If the original document has no margin on its top edge, the top
3
/
16
" (5 mm) of its print will be cut off even when
[Mar-
gin+]
is selected. Move the original about
3
/
16
" (5 mm) inwards from the top edge of the Stage Glass and reduce
the size.
ORCH_ML_EN.book Page 46 Wednesday, November 10, 2004 7:32 PM