Riso rz 510 User Manual - page 20
Getting Acquainted
Control Panel
18
Control Panel
The Control Panel features permanent keys such as
and
. It also has a large-size display that shows var-
ious messages and function buttons.
This section introduces hardware Key names and functions, as well as the display window and its functions.
1)
Mode Key (
)
p.21)
Use to change modes.
2)
Display (
)
p.20
∼
p.25)
3)
Print Quantity Display
Displays the number of copies, or numeric values
entered for various settings.
4)
P Key (
)
p.72)
Use to retrieve stored programs. The indicator on the key
lights when set.
5)
×Key (
)
p.72)
Use to move between fields in setup screens, or set up
programed printing.
6)
+ Key (
)
p.72)
Use to move between fields in setup screens, or set up
programed printing.
7)
C Key
Cancels entered numerical values, or reset the counter
to 0.
8)
Print Quantity Keys (0 to 9 Keys)
Use to enter the number of copies, or the numerical val-
ues for various settings.
9)
Key (
)
p.72,
)
p.81)
Use to move between items in a setup screen, or retrieve
stored memory.
10)
Print Speed Adjustment Keys/Indicator
(
)
p.62)
Select the print speed from five levels.
The indicator above the keys shows the current speed
level.
11)
Print Density Adjustment Keys/Indicator
(
)
p.63)
Select the print density from five levels.
The indicator above the keys shows the current density
level.
12)
Vertical Print Position Adjustment Keys/
Indicator (
)
p.64)
Adjust the print position in the vertical direction (within
±
19
/
32
" (±15 mm)) after making a master.
The indicator above the keys shows the offset amount
from the center.
To clear the offset amount, press
.
M
SPEED
DENSITY
PRINT POSITION
SLOW
FAST
LIGHT
DARK
MODE
READY
1 0 0 %
Letter
Line
Black
Image
Basic
Selections
Functions
Admin.
Contrast
Auto
Size
Paper
Idle
2 Up
2 in 1
Info
Ready to Make Master
1
2
3
4
5
6
7
8
9
10
11
12
ORCH_ML_EN.book Page 18 Wednesday, November 10, 2004 7:32 PM