Riso rz 510 User Manual - page 37
Basic Operations
Printing from a Paper Document or Book
35
2 Up/2 in 1 (
)
p.54)
Printing two originals side-by-side on one
sheet
Book Shadow (
)
p.59)
Printing from magazines or books
Max. Scan (
)
p.94)
Making a master that utilizes the maximum
printing area
ADF Semi-Auto (
)
p.95)
Allows you to check a proof copy before
printing starts
• This setting is available when the ADF
(Auto Document Feeder) unit (Option) is
installed.
Idling Action (
)
p.91)
Manually activate the idling action
Renew Page (
)
p.93)
Duplicating a master
Job Separation
• This setting is available when the Job
Separator (option) is installed.
Tip:
When using a Linked Printer (sold separately)
The “Auto-Link” function allows you to select the
output device according to print volume.
(Factory default is set to print 20 or more copies
from the machine, 19 or less from a Linked
Printer.)
However, when the following functions are
selected, all copies are printed from the machine.
• 2 Up
• 2 in 1
• Book Shadow
• Program
• Ink Saving
Important!:
• Be sure to enter the number of copies before
pressing the
key.
The output device will be chosen according
to the number of copies specified.
When set to 0, pressing the
key starts
the master-making process on the machine.
Note:
• The “Link-Free Volume” setting, which
affects the automatic selection of the output
device, can be modified on the Admin.
screen.
)
p.102
6
Press the
key.
Starts scanning of the original. A master is made
once the scan is completed, and a proof copy will
be printed.
Tip:
Auto Idling
When “Auto Idling” is set to ON, idling operations
may occur when master-making process is initi-
ated.
Factory default is set to idle automatically at the
beginning of the master-making when the
machine is inactive for over 12 hours.
To toggle “Auto Idling” ON/OFF, or to modify num-
ber of hours before activating next idling, go to the
Admin. screen.
)
p.100
Idling can also be manually initiated when making
a master.
)
p.91
Note:
• When “Auto Process” is selected, the process
will be different.
)
p.50
ORCH_ML_EN.book Page 35 Wednesday, November 10, 2004 7:32 PM